Set invariance techniques such as control barrier functions (CBFs) can be used to enforce time-varying constraints such as keeping a safe distance from dynamic objects. However, existing methods for enforcing time-varying constraints often overlook model uncertainties. To address this issue, this paper proposes a CBFs-based robust adaptive controller design endowing time-varying constraints while considering parametric uncertainty and additive disturbances. To this end, we first leverage Robust adaptive Control Barrier Functions (RaCBFs) to handle model uncertainty, along with the concept of Input-to-State Safety (ISSf) to ensure robustness towards input disturbances. Furthermore, to alleviate the inherent conservatism in robustness, we also incorporate a set membership identification scheme. We demonstrate the proposed method on robotic surface treatment that requires time-varying force bounds to ensure uniform quality, in numerical simulation and real robotic setup, showing that the quality is formally guaranteed within an acceptable range.

T cell receptor (TCR) recognition of peptide-MHC (pMHC) complexes is a central component of adaptive immunity, with implications for vaccine design, cancer immunotherapy, and autoimmune disease. While recent advances in machine learning have improved prediction of TCR-pMHC binding, the most effective approaches are black-box transformer models that cannot provide a rationale for predictions. Post-hoc explanation methods can provide insight with respect to the input but do not explicitly model biochemical mechanisms (e.g. "Explain-by-design" models (i.e., with architectural components that can be examined directly after training) have been explored in other domains, but have not been used for TCR-pMHC binding. We propose explainable model layers (TCR-EML) that can be incorporated into protein-language model backbones for TCR-pMHC modeling. Our approach uses prototype layers for amino acid residue contacts drawn from known TCR-pMHC binding mechanisms, enabling high-quality explanations for predicted TCR-pMHC binding. Experiments of our proposed method on large-scale datasets demonstrate competitive predictive accuracy and generalization, and evaluation on the TCR-XAI benchmark demonstrates improved explainability compared with existing approaches. For the adaptive immune system, T cells are essential for detecting and responding to antigens from pathogens such as viruses, bacteria, and cancer cells (Joglekar & Li, 2021), as well as in autoimmune contexts.

Affordance is crucial for intelligent robots in the context of object manipulation. In this paper, we argue that affordance should be task-/instruction-dependent, which is overlooked by many previous works. That is, different instructions can lead to different manipulation regions and directions even for the same object. According to this observation, we present a new dataset comprising fifteen thousand object-instruction-affordance triplets. All scenes in the dataset are from an egocentric viewpoint, designed to approximate the perspective of a human-like robot. Furthermore, we investigate how to enable large multimodal models (LMMs) to serve as affordance predictors by implementing a ``search against verifiers'' pipeline. An LMM is asked to progressively predict affordances, with the output at each step being verified by itself during the iterative process, imitating a reasoning process. Experiments show that our method not only unlocks new instruction-oriented affordance prediction capabilities, but also achieves outstanding performance broadly.

We introduce PROD (Palpative Reconstruction of Deformables), a novel method for reconstructing the shape and mechanical properties of deformable objects using elastostatic signed distance functions (SDFs). Unlike traditional approaches that rely on purely geometric or visual data, PROD integrates palpative interaction -- measured through force-controlled surface probing -- to estimate both the static and dynamic response of soft materials. We model the deformation of an object as an elastostatic process and derive a governing Poisson equation for estimating its SDF from a sparse set of pose and force measurements. By incorporating steady-state elastodynamic assumptions, we show that the undeformed SDF can be recovered from deformed observations with provable convergence. Our approach also enables the estimation of material stiffness by analyzing displacement responses to varying force inputs. We demonstrate the robustness of PROD in handling pose errors, non-normal force application, and curvature errors in simulated soft body interactions. These capabilities make PROD a powerful tool for reconstructing deformable objects in applications ranging from robotic manipulation to medical imaging and haptic feedback systems.

--T o enable humanoid robots to work robustly in confined environments, multi-contact motion that makes contacts not only at extremities, such as hands and feet, but also at intermediate areas of the limbs, such as knees and elbows, is essential. We develop a method to realize such whole-body multi-contact motion involving contacts at intermediate areas by a humanoid robot. Deformable sheet-shaped distributed tactile sensors are mounted on the surface of the robot's limbs to measure the contact force without significantly changing the robot body shape. The multi-contact motion controller developed earlier, which is dedicated to contact at extremities, is extended to handle contact at intermediate areas, and the robot motion is stabilized by feedback control using not only force/torque sensors but also distributed tactile sensors. Through verification on dynamics simulations, we show that the developed tactile feedback improves the stability of whole-body multi-contact motion against disturbances and environmental errors. Furthermore, the life-sized humanoid RHP Kaleido demonstrates whole-body multi-contact motions, such as stepping forward while supporting the body with forearm contact and balancing in a sitting posture with thigh contacts. UMANOID robots are expected to realize various manipulation and locomotion tasks to support or replace humans.

Electrostatic adhesion is widely used in mobile robotics, haptics, and robotic end effectors for its adaptability to diverse substrates and low energy consumption. Force sensing is important for feedback control, interaction, and monitoring in the EA system. However, EA force monitoring often relies on bulky and expensive sensors, increasing the complexity and weight of the entire system. This paper presents an acoustic-pressure-based method to monitor EA forces without contacting the adhesion pad. When the EA pad is driven by a bipolar square-wave voltage to adhere a conductive object, periodic acoustic pulses arise from the EA system. We employed a microphone to capture these acoustic pressure signals and investigate the influence of peak pressure values. Results show that the peak value of acoustic pressure increased with the mass and contact area of the adhered object, as well as with the amplitude and frequency of the driving voltage. We applied this technique to mass estimation of various objects and simultaneous monitoring of two EA systems. Then, we integrated this technique into an EA end effector that enables monitoring the change of adhered object mass during transport. The proposed technique offers a low-cost, non-contact, and multi-object monitoring solution for EA end effectors in handling tasks.

Occlusal contacts are the locations at which the occluding surfaces of the maxilla and the mandible posterior teeth meet. Occlusal contact detection is a vital tool for restoring the loss of masticatory function and is a mandatory assessment in the field of dentistry, with particular importance in prosthodontics and restorative dentistry. The most common method for occlusal contact detection is articulating paper. However, this method can indicate significant medically false positive and medically false negative contact areas, leaving the identification of true occlusal indications to clinicians. To address this, we propose a multiclass Vision Transformer and Fully Convolutional Network ensemble semantic segmentation model with a combination hierarchical loss function, which we name as Hierarchical Fully Convolutional Branch Transformer (H-FCBFormer). We also propose a method of generating medically true positive semantic segmentation masks derived from expert annotated articulating paper masks and gold standard masks. The proposed model outperforms other machine learning methods evaluated at detecting medically true positive contacts and performs better than dentists in terms of accurately identifying object-wise occlusal contact areas while taking significantly less time to identify them.

This paper introduces RoTipBot, a novel robotic system for handling thin, flexible objects. Different from previous works that are limited to singulating them using suction cups or soft grippers, RoTipBot can grasp and count multiple layers simultaneously, emulating human handling in various environments. Specifically, we develop a novel vision-based tactile sensor named RoTip that can rotate and sense contact information around its tip. Equipped with two RoTip sensors, RoTipBot feeds multiple layers of thin, flexible objects into the centre between its fingers, enabling effective grasping and counting. RoTip's tactile sensing ensures both fingers maintain good contact with the object, and an adjustment approach is designed to allow the gripper to adapt to changes in the object. Extensive experiments demonstrate the efficacy of the RoTip sensor and the RoTipBot approach. The results show that RoTipBot not only achieves a higher success rate but also grasps and counts multiple layers simultaneously -- capabilities not possible with previous methods. Furthermore, RoTipBot operates up to three times faster than state-of-the-art methods. The success of RoTipBot paves the way for future research in object manipulation using mobilised tactile sensors. All the materials used in this paper are available at \url{https://sites.google.com/view/rotipbot}.

There has been significant recent interest in the mechanics community to design structures that can either violate reciprocity, or exhibit elastic asymmetry or odd elasticity. While these properties are highly desirable to enable mechanical metamaterials to exhibit novel wave propagation phenomena, it remains an open question as to how to design passive structures that exhibit both significant non-reciprocity and elastic asymmetry. In this paper, we first define several design spaces for chiral metamaterials leveraging specific design parameters, including the ligament contact angles, the ligament shape, and circle radius. Having defined the design spaces, we then leverage machine learning approaches, and specifically Bayesian optimization, to determine optimally performing designs within each design space satisfying maximal non-reciprocity or stiffness asymmetry. Finally, we perform multi-objective optimization by determining the Pareto optimum and find chiral metamaterials that simultaneously exhibit high non-reciprocity and stiffness asymmetry. Our analysis of the underlying mechanisms reveals that chiral metamaterials that can display multiple different contact states under loading in different directions are able to simultaneously exhibit both high non-reciprocity and stiffness asymmetry. Overall, this work demonstrates the effectiveness of employing ML to bring insights to a novel domain with limited prior information, and more generally will pave the way for metamaterials with unique properties and functionality in directing and guiding mechanical wave energy.

Hand motion capture data is now relatively easy to obtain, even for complicated grasps; however this data is of limited use without the ability to retarget it onto the hands of a specific character or robot. The target hand may differ dramatically in geometry, number of degrees of freedom (DOFs), or number of fingers. We present a simple, but effective framework capable of kinematically retargeting multiple human hand-object manipulations from a publicly available dataset to a wide assortment of kinematically and morphologically diverse target hands through the exploitation of contact areas. We do so by formulating the retarget operation as a non-isometric shape matching problem and use a combination of both surface contact and marker data to progressively estimate, refine, and fit the final target hand trajectory using inverse kinematics (IK). Foundational to our framework is the introduction of a novel shape matching process, which we show enables predictable and robust transfer of contact data over full manipulations while providing an intuitive means for artists to specify correspondences with relatively few inputs. We validate our framework through thirty demonstrations across five different hand shapes and six motions of different objects. We additionally compare our method against existing hand retargeting approaches. Finally, we demonstrate our method enabling novel capabilities such as object substitution and the ability to visualize the impact of design choices over full trajectories.